混凝土搅拌机搅拌臂的作用有哪些呢?下面
中科自上料搅拌机带大家来了解一下吧！
What is the function of the concrete mixer mixing arm? Let's learn about it from the charging mixer!
混凝土搅拌机包括搅拌筒，搅拌筒内装有搅拌轴，搅拌筒的两端壁处的搅拌轴上都安装有一用于清理端壁面的边臂，两边臂之间的搅拌轴上的中点的两侧各安装有一组螺旋式排布的搅拌臂，两组搅拌臂在轴向的排布上均自端臂中臂，在旋转方向的排布均匀分布在端臂中臂，各搅拌臂的顶端都有固定的搅拌叶片，两边臂在旋转方向的排布上分别落后于同侧的搅拌臂端臂。
The concrete mixer includes a mixing drum which is equipped with a mixing shaft. The mixing shafts at both ends of the mixing drum are equipped with an edge arm for cleaning the end wall surface. The two sides of the middle point of the mixing shaft between the two arms are equipped with a set of spiral arrangement mixing arms. The two groups of mixing arms are arranged from the end arm to the middle arm in the axial arrangement, and are evenly distributed in the rotation direction From the end arm to the middle arm, the top of each mixing arm has a fixed mixing blade, and the two arms are respectively behind the end arm of the same side in the arrangement of rotation direction.
搅拌臂本身又分为侧搅拌臂（有正反之分），中搅拌臂（亦有正反之分），搅拌臂下面是连接的瓦座，连接用搅拌臂高强螺栓4套。上面是安装的耐磨搅拌叶片，连接用搅拌叶片高强螺栓2套。另外说一下，有的厂家设计有搅拌方粘轴转环，是间隔安装在搅拌臂间的分固定和转动两种方式。
The mixing arm itself is divided into side mixing arm (positive and negative), middle mixing arm (positive and negative). Under the mixing arm is the connected tile seat, which is connected with 4 sets of high-strength bolts of the mixing arm. There are two sets of high-strength bolts for connecting the wear-resistant mixing blade. In addition, some manufacturers have designed a mixing square stick shaft rotating ring, which is installed between the mixing arms in two ways: fixed and rotating.
本着实用新型将边臂在整体搅拌臂布局的旋转方向的位置后撤，使其落后于同侧的搅拌臂组的端臂，这样在实际工作时，边臂工作阻力较小、与搅拌筒之间无切磨，使边臂的耐久度提高，搅拌轴所需驱动力也减小，因此可装配小功率的电机，使制造成本降低，能耗相应减小。
According to the utility model, the position of the side arm in the rotation direction of the overall mixing arm layout is retreated, so that it lags behind the end arm of the mixing arm group on the same side. In this way, the working resistance of the side arm is small, there is no cutting and grinding between the side arm and the mixing drum, so that the durability of the side arm is improved, and the driving force required for the mixing shaft is reduced. Therefore, the small power motor can be assembled to reduce the manufacturing cost and energy consumption Decrease accordingly.
This is the introduction of the concrete mixer arm. To learn more, please click on the Zhongke self feeding mixer https://www.cnzkjf.com Official website.
