为了提高水泥的运输效率，减少袋装水泥造成的资源浪费，目前绝大多数水泥都采用散装水泥罐车运输，因水泥罐车都采用气力输送卸料，卸料速度和卸料剩余率是考核水泥罐车卸料效率的重要指标。如何保证罐内水泥尽量卸完、卸尽，采用正确的方法非常重要。因卸料过程中罐内水泥无法肉眼直观看到，要借助一些方法才能辨别水泥卸料情况，下面
中科搅拌车给大家介绍几种简易判别水泥是否卸完的方法：
In order to improve the transportation efficiency of cement and reduce the waste of resources caused by bagged cement, at present, the vast majority of cement is transported by bulk cement tank truck, because the cement tank truck adopts pneumatic conveying to discharge, the discharge speed and discharge residual rate are important indicators to assess the discharge efficiency of cement tank truck. How to ensure that the cement in the tank is discharged as far as possible, it is very important to adopt the correct method. As the cement in the tank can not be seen directly by naked eyes during the unloading process, it is necessary to use some methods to identify the cement unloading situation. The following is a brief introduction to several simple methods for judging whether the cement has been unloaded:
压力表检查法：散装水泥罐车在卸料时，罐内空气压力为1.8～2.4公斤/平方厘米，卸料快结束时，气压快速下降，如果压力表降到0～0.2公斤/平方厘米之间，则证明罐内水泥基本卸完。
Pressure gauge inspection method: when the bulk cement tank truck is discharging, the air pressure in the tank is 1.8-2.4kg/cm2. When the discharging is almost finished, the air pressure drops rapidly. If the pressure gauge drops to 0-0.2kg/cm2, it proves that the cement in the tank is basically discharged.
卸料时间判别法：正常水泥罐卸料速度一般为每分种1～1.2吨，如果水泥装载重量为32吨，则一般需要半小时左右卸完，所以可以根据卸料吨位计算卸料时间，这样前25分钟操作人员比较轻松，没有必要长时间紧盯压力表或通过其它方法检查是否卸完。
Discharge time discrimination method: the discharge speed of normal cement tank is generally 1-1.2 tons per minute. If the loading weight of cement is 32 tons, it usually takes about half an hour to complete the discharge. Therefore, the discharge time can be calculated according to the discharge tonnage. In this way, the operator is more relaxed in the first 25 minutes, and it is unnecessary to keep a close eye on the pressure gauge for a long time or check whether the discharge is completed by other methods.
空压机声音辨别法：正常卸料时空压机负载大，空压机工作时发出的声音比较沉闷，罐体卸料结束时，空压机负载变小，工作声音变得清脆。
Identification method of air compressor sound: the load of air compressor is large in normal discharge time, and the sound of air compressor is relatively dull when it works. At the end of tank discharge, the load of air compressor becomes smaller, and the working sound becomes crisp.
敲打罐体法：水泥卸料过程中，可以用手敲打罐体，如果声音没有回音，则证明罐体内水泥余料较多，还要卸一段时间;如果罐体有回音，证明罐体内水泥快卸完了。
Knock tank method: in the process of cement unloading, you can knock the tank by hand. If there is no echo, it proves that there is a lot of cement in the tank and it needs to be unloaded for a period of time. If there is echo, it proves that the cement in the tank is almost finished.
卸料软管观察法：正常卸料时，卸料软管受流化水泥冲击，软管不断抖动，如果软管不再抖动，也可证明罐内水泥基本卸完。
Observation method of discharge hose: during normal discharge, the discharge hose is impacted by fluidizing cement, and the hose shakes continuously. If the hose does not shake, it can also prove that the cement in the tank is basically discharged.
水泥接收塔顶扬灰辨别法：正常卸料时，水泥消耗的气量相对较少，“料多气少”，接收塔顶扬灰较少，卸料后期“料少气多”，接收塔顶扬灰增多。
Identification method for lifting ash on the top of cement receiving Tower: during normal discharge, the amount of gas consumed by cement is relatively less, "more material and less gas", less lifting ash on the top of receiving tower, and "less material and more gas" at the later stage of discharge, more lifting ash on the top of receiving tower.
The above is the content of how to judge whether the discharge of mixer is completed shared by Zhongke mixer. I hope it can help you. For more wonderful information, please click our website: https://www.cnzkjf.com
