自上料搅拌车之类的车辆设备通常在外表上有一层油漆，以更好地维护车辆的外部和外部。因为涂料在正常操作期间很容易损坏，掉漆后的自上料搅拌车不仅仅是影响美观，更是影响车的长久使用，所以我们今天将介绍如何维护自上料搅拌车涂料不受损坏。跟小编一起来看看吧。
Vehicle equipment such as self loading mixer usually has a layer of paint on the surface to better maintain the exterior and exterior of the vehicle. Because the coating is easy to be damaged during normal operation, the self feeding mixer after paint dropping not only affects the appearance, but also affects the long-term use of the vehicle, so today we will introduce how to maintain the self feeding mixer coating from damage. Let's have a look with Xiao Bian.
1.假如不运用
中科自上料搅拌车的涂漆外表，则金属涂层会发作十分细的裂纹，并会继续浸透涂层，直到其浸透到整个涂层为止。假如裂纹中包含蜡，则身体上会出现条纹。定期打蜡能够逐步减少裂纹。
1. If the painted surface of Zhongke self loading mixer is not used, the metal coating will have very fine cracks and continue to soak the coating until it reaches the whole coating. If the cracks contain wax, streaks will appear on the body. Regular waxing can gradually reduce cracks.
2.自上料搅拌车在露出于阳光的紫外线下会蒸发并维护空气中的油，随着时刻的消逝，涂料会过度涣散。油漆外表的亮度和深度大大下降，油漆外表逐步变白，构成氧化层，缩短了油漆寿数。假如自上料搅拌车的油漆外表被严峻氧化，则能够经过研磨和抛光对其进行处理。
2. The self loading mixer will evaporate and maintain the oil in the air under the ultraviolet light exposed from the sun. As time goes by, the coating will be too lax. The brightness and depth of the paint surface are greatly reduced, and the paint surface gradually turns white, forming an oxide layer, which shortens the life of the paint. If the paint surface of self feeding mixer is severely oxidized, it can be treated by grinding and polishing.
3.因为自上料搅拌车，外表发作磨损。可能是昆虫，鸟粪，树汁，柏油和沥青所致。一些小的蚀刻能够经过研磨和抛光。
3. Because of the self feeding mixer, the appearance is worn. It may be caused by insects, bird droppings, tree sap, tar and asphalt. Some small etchings can be solved by grinding and polishing.
除了上述办法之外，为了有效地防止油漆溅到车辆上，在驾驶时有必要留意驾驶并防止碰撞和摩擦。不然会发作其他损坏。
In addition to the above methods, in order to effectively prevent paint splashing on the vehicle, it is necessary to pay attention to driving and prevent collision and friction. Otherwise, there will be other damage.
The above is the way to maintain the paint surface of Zhongke self loading mixer. I hope it can help you. If you have any other questions, please pay attention to our website https://www.cnzkjf.com Or call us!
