In the process of operation, due to long-term continuous operation, the temperature of Zhongke Jufeng concrete mixer will rise, but if the temperature exceeds the capacity of the concrete mixer itself, the equipment will be damaged to a certain extent. Therefore, when the temperature of the equipment is too high, we need to do the corresponding maintenance work. Let's learn about it.

　　1,身体为了防止发动机过热:由于环境温度高,发动机容易过热,加强发动机冷却系统的检查和维护,包括水箱、恒温器、水泵、风扇和其他部分的检查,注意及时注入冷却水。当水温超过100℃时，在阴凉处停车降温，让发动机空转，打开引擎盖帮助加热。

 

　　1. In order to prevent the engine from overheating: due to the high ambient temperature, the engine is easy to overheat, strengthen the inspection and maintenance of the engine cooling system, including the inspection of water tank, thermostat, water pump, fan and other parts, and pay attention to the timely injection of cooling water. When the water temperature exceeds 100 ℃, stop in the shade to cool down, let the engine idle, open the engine cover to help heat.

　　2、防止发动机爆燃:夏季温度较高，有时超过35℃，而这个季节，对于一些部分老化的汽车，自然爆燃的概率也要高得多。所以做好准备。

　　2. Prevent engine deflagration: the temperature is higher in summer, sometimes over 35 ℃. In this season, for some aging cars, the probability of natural deflagration is much higher. So be prepared.

　　3、防止对车漆的损伤:车漆经过强烈的日晒，老化、起皱，而普通的美容打蜡虽然能起到一定的防晒作用，但因为任何车蜡都含有硅成分，经过紫外线照射会使车漆生锈，留下小黑点。车蜡本身并没有起到增强硬度、抗紫外线的作用，但会因温度过高而迅速丢失，停车时要注意将车停放在阴凉处。

　　3. Prevent damage to the car paint: the car paint is aged and wrinkled after strong sun exposure, while the ordinary beauty waxing can play a certain role in sun protection, but because any car wax contains silicon component, the car paint will rust and leave small black spots after ultraviolet irradiation. Car wax itself does not play a role in enhancing hardness and UV resistance, but it will be lost quickly due to high temperature. When parking, pay attention to park the car in a cool place.

　　4、防止爆胎:高温易爆胎，高温易使轮胎变形，耐跌落。但是由于轮胎本身，气压不达标，轮胎老化，性能变弱，或者在行驶过程中轮胎碰到坚硬的金属或其他坚硬的东西，都会导致汽车的轮胎突然瘪掉。

　　4. Prevent tire burst: high temperature is easy to burst, high temperature is easy to deform the tire, resistant to falling. But because of the tire itself, the air pressure is not up to standard, the tire is aging, the performance becomes weak, or the tire encounters hard metal or other hard things during the driving process, which will cause the tire of the car to suddenly shrink.

　　5、防止发动机润滑不良:当温度较高时，机油粘度下降，抗氧化性变差，导致润滑不良。所以要经常检查油量的质量，并及时补充或更换。注意及时清洗机油滤清器、散热器，确保机油光滑、散热良好，尽量避免发动机超负荷工作。

　　5. Prevent poor engine lubrication: when the temperature is high, the viscosity of the oil decreases, and the oxidation resistance becomes poor, resulting in poor lubrication. Therefore, it is necessary to check the quality of oil quantity frequently, and supplement or replace it in time. Pay attention to clean the oil filter and radiator in time to ensure that the oil is smooth and the heat dissipation is good, and try to avoid engine overload.

　　6、防止制动制动失灵:制动液在高温环境下更容易蒸发汽化，在制动管路中形成蒸汽阻力，制动蹄片也容易烧坏，导致制动失灵。因此，需要经常检查和调整制动系统，在下坡时注意驻车制动，以保证良好的制动性能。如果发现刹车毂是热的，应停止冷却，但不要倒冷水，以防刹车毂破裂。

　　6. Prevent brake failure: the brake fluid is more likely to evaporate and vaporize under high temperature environment, forming steam resistance in the brake pipeline, and the brake shoe is also easy to burn, resulting in brake failure. Therefore, it is necessary to check and adjust the brake system frequently. Pay attention to the parking brake when going downhill to ensure good braking performance. If the brake hub is found to be hot, stop cooling, but do not pour cold water to prevent the brake hub from cracking.

　　我相信,我们也知道,任何机械设备操作过程中使用三分钟使用,7分钟来维持,只有这样才能保证设备正常运行的良好的性能,延长设备的使用寿命,我希望你能根据设备的知识合理建设和使用。

　　I believe that we also know that any mechanical equipment can be used for three minutes and maintained for seven minutes in the process of operation. Only in this way can the normal operation of the equipment be guaranteed and the service life of the equipment be extended. I hope you can build and use the equipment reasonably according to the knowledge of the equipment.