目前自动上料搅拌车已经被广泛使用,提高了工作效率,同时大家也比较关注的是自动上料搅拌车如何使用能省油,降低成本,下面小编就来给大家简单介绍一下自动上料搅拌车的省油方式方法。
At present, the automatic feeding mixer has been widely used to improve the work efficiency. At the same time, we also pay more attention to how the automatic feeding mixer can save fuel and reduce the cost. The following small series will briefly introduce the fuel-saving methods of the automatic feeding mixer.
在行驶中或启动时发现自动上料搅拌车车轮有异常响声,要及时检查轴承及刹车系统是否有故障。
If abnormal noise is found on the wheels of the automatic feeding mixer truck during driving or startup, timely check whether the bearing and braking system are faulty.
如果车轮运转不正常,就会影响车速,从而使油耗加大。
If the wheels do not operate normally, it will affect the speed and increase the fuel consumption.
离合器打滑会使动员机的转速降低。
Clutch slip will reduce the speed of the mobilization machine.
当您在急加速时发现动员机转速表增加很快,但车速增加却很慢,这时可以鉴定是离合器打滑了。
When you accelerate rapidly, you find that the tachometer of the mobilizer increases rapidly, but the speed increases slowly. At this time, you can identify that the clutch is slipping.
自动上料搅拌车火花塞使用的时间太长,也会出现油耗加大的现象。因为火花塞损坏会使焚烧的能力下降,使搅拌车提速减慢,导致柴油耗损明显增加,只要更换火花塞就好了。
If the spark plug of automatic feeding mixer is used for too long, the fuel consumption will increase. Because the damage of the spark plug will reduce the incineration capacity, slow down the speed-up of the mixer truck, and significantly increase the diesel consumption. It's only necessary to replace the spark plug.
自动上料搅拌车的温控开关和节温器损坏时,会呈现油耗增加的现象。长时间行驶时,凡是会出现汽缸压力不符的现象,这时油耗也会明显增加。同时如果出现这种情况,那么就需要大修了。
When the temperature control switch and thermostat of the automatic feeding mixer are damaged, the fuel consumption will increase. When driving for a long time, the cylinder pressure will be inconsistent, and the fuel consumption will increase significantly. At the same time, if this happens, it will need to be overhauled.
The above is Zhongke concrete mixer https://www.cnzkjf.com/ Thank you for checking the information of our company in your busy schedule. If you want to know more, you are welcome to inquire!