In order to reduce the wear and tear of the parts of Zhongke Jufeng automatic feeding mixer, we need to pay attention to this problem and share with us:

　　为了提高自身的利益，许多企业在施工过程中不断提高工作效率。如果设备因为故障而维修，会增加很多费用。而通常在操作过程中使用的自动上料混合器在磨损过程中是比较常见的，那么我们应该用这种方式来避免这种情况的发生吗?

　　In order to improve their own interests, many enterprises continue to improve their work efficiency in the construction process. If the equipment is repaired due to failure, it will increase a lot of costs. And the automatic feeding mixer which is usually used in the operation process is quite common in the wear process, so should we use this way to avoid this situation?

　　1. 保持自动上料搅拌机的额定负荷

　　1. Maintain the rated load of the automatic feeding mixer喜欢这种建筑机械设备负载性质和大小的设备部件的损失有重要影响,通用机械零件磨损将随着负载的增加,增加的部分承担的负荷高于设计工作负载,其组件磨损将继续增加。

　　The loss of equipment components that like the load nature and size of such construction machinery and equipment has an important impact. With the increase of load, the load borne by the increased part will be higher than the design work load, and the component wear will continue to increase.

　　2. 及时清洗，减少机械杂质对设备的影响

　　2. Clean in time to reduce the impact of mechanical impurities on the equipment机械杂质一般是指灰尘、泥土等材料和工程机械中使用的一些自己的金属屑、油脂等。一旦这些杂质到达机器之间的工作表面，其危害是非常大的:不仅使摩擦增加，燃油消耗增加。并会破坏润滑油膜，划伤表面。

　　Mechanical impurities generally refer to dust, soil and other materials, as well as some of their own metal chips and grease used in construction machinery. Once these impurities reach the working surface between machines, their harm is very great: not only increase friction, but also increase fuel consumption. It will damage the lubricating oil film and scratch the surface.

　　3.防止自动给料混合器部件腐蚀

　　3. Prevent corrosion of automatic feeding mixer components局部腐蚀，有时不易被发现，容易被忽视，危害更大。雨水、化学品在空气中通过机械零件的管道、裂缝等渗透机械、腐蚀零件。腐蚀部件的持续运转也会加速机械磨损，增加机械故障。这就要求管理人员和操作人员根据当地的天气条件、现场条件，采取合理的施工安排，限度地降低机械部件的化学腐蚀风险。

　　Local corrosion, sometimes not easy to be found, easy to be ignored, more harmful. Rainwater, chemicals in the air through the mechanical parts of the pipeline, cracks and other penetration machinery, corrosion parts. Continuous operation of corroded parts will also accelerate mechanical wear and increase mechanical failure. This requires the managers and operators to take reasonable construction arrangements according to the local weather conditions and site conditions, so as to minimize the chemical corrosion risk of mechanical parts.

　　4. 保持自动上料混合机各部件的合理温度

　　4. Keep the reasonable temperature of all parts of the automatic feeding mixer在运行中，各部件的温度都有自己的正常范围。过高或过低的温度都会影响零件的强度，所以我们需要配合冷却剂和润滑油来控制部分零件的温度，使其工作在一个合理的温度范围内。

　　In operation, the temperature of each component has its own normal range. Too high or too low temperature will affect the strength of parts, so we need to cooperate with coolant and lubricating oil to control the temperature of some parts to make them work in a reasonable temperature range.

　　许多机械设备在初次故障时是由于部件的磨损造成的，中科聚峰自动上料搅拌机在运行过程中自然也是一样的。因此，在使用过程中减少设备零部件的磨损，可以有效避免机械设备在使用过程中的故障。

　　Many mechanical equipment in the first failure is caused by the wear of components, Zhongke Jufeng automatic feeding mixer in the operation process is naturally the same. Therefore, in the use process, reducing the wear of equipment parts can effectively avoid the failure of mechanical equipment in the use process.