1. The ground support must be horizontal. Otherwise, it is necessary to make a horizontal support surface. They can't support the hole.

　　2、小型混凝土搅拌机要支撑在坚实的地面上，如果腿的压力大于地面上允许的压力，则需要使用支撑板或辅助木来增加支撑表面积。

　　2. The small concrete mixer shall be supported on a solid ground. If the maximum pressure of the leg is greater than the allowable pressure on the ground, the support plate or auxiliary wood shall be used to increase the surface area of the support.

　　3.当小型混凝土搅拌机在坑或坡附近支承时，应保持距离。

　　3. When the small concrete mixer is supported near the pit or slope, a safe distance shall be kept.

　　4、在支承时，要保证机床处于水平状态，机床前后左右水平偏差角不超过3度。

　　4. When supporting, make sure that the machine tool is in a horizontal state, and the maximum deviation angle of left and right levels before and after the machine tool does not exceed 3 degrees.

　　5. 当支撑腿打开或关闭时，支撑腿的旋转范围为危险区，在此范围内可能会有人受伤。

　　5. When the support leg is open or closed, the rotation range of the support leg is a dangerous area, in which there may be injuries.

　　6、在支撑时，所有的腿都要有弹性，并向正常的方位角张开(腿和耳朵上的箭头对准，前肢和前肢伸直手臂上的箭头对准)否则有翻倒的危险。

　　6. When supporting, all legs should be elastic and open to the normal azimuth (the arrows on the legs and ears should be aligned, and the arrows on the arms should be aligned). Otherwise, there is a risk of overturning.

　　7、要根据腿的支撑能力要求来操作臂架，要把臂架放在主支撑臂架的腿之后。

　　7. To operate the boom according to the requirements of leg support capacity, put the boom behind the leg of the main support boom.

　　8,稳定的因素有必要立即褶皱繁荣,后的负责人根据要求支持,稳定的因素包括雨、雪水或其他水源引起的地面条件的支撑脚一边地面下沉腿缸泄漏。

　　8. It is necessary to fold and prosper the stable factors immediately, and the person in charge after elimination shall support according to the requirements. The stable factors include the leakage of the supporting foot side of the ground sinking leg cylinder caused by rain, snow water or other water sources.

　　以上是小混凝土搅拌机制作的注意事项，希望能对您有所帮助，如果还有问题可以打电话给我们公司，与您商讨。

　　The above are the safety precautions for the production of small concrete mixer. I hope it can help you. If you have any questions, you can call our company to discuss with you.