As a mechanical equipment, Zhongke self loading mixer will seriously endanger the use safety and work efficiency of the equipment once the phenomenon of axle holding occurs, so it is necessary to avoid the phenomenon of axle holding. And the following small series to talk about the harm of the equipment holding shaft and related preventive measures is what it is.

搅拌车抱轴的危害：

The harm of mixer axle holding is as follows

1、影响混凝土的质量，搅拌车抱轴后打出的混凝土搅拌不均匀。

1. The quality of concrete is affected, and the mixing of concrete is uneven after the mixer holds the shaft.

2、增加了中科自上料搅拌车的负载，耗能增加。

2. The load of Zhongke self loading mixer is increased and the energy consumption is increased.

3、影响耐磨件、轴端密封的寿命，加快耐磨件的磨损，抱轴后搅拌臂磨损非常严重，使用寿命大大缩短。

3. It affects the service life of wear-resistant parts and shaft end seal, and speeds up the wear of wear-resistant parts. After holding the shaft, the mixing arm is seriously worn, and the service life is greatly shortened.

防范措施：

Preventive measures:
                    

1、调节进料顺序及时间，骨料、粉料预混落入主机内（但骨料须先下一部分），这样可以让粉料一定程度上附着在骨料上，减轻粉料落入主机内附着在搅拌轴和臂上的可能且可以提高搅拌效率。

1. By adjusting the feeding sequence and time, the premixed aggregate and powder fall into the main machine (but the next part of the aggregate must be added first), which can make the powder adhere to the aggregate to a certain extent, reduce the possibility of the powder falling into the main machine and adhering to the mixing shaft and arm, and improve the mixing efficiency.

2、主机盖水管线要求与搅拌轴线处于同一垂直面，并保证搅拌臂与搅拌轴夹角处上方有直喷喷嘴。因为搅拌臂和轴夹角处是粘结物容易附着的地方，一般出现抱轴都是从搅拌臂根部开始的。同时要求加水的时间贯穿始终。

2. The center line of main cover water pipe shall be in the same vertical plane with the center line of mixing shaft, and there shall be direct injection nozzle above the angle between mixing arm and mixing shaft. Because the angle between the mixing arm and the shaft is the place where the adhesive is easy to adhere, generally, the holding shaft starts from the root of the mixing arm. At the same time, the time of adding water is required throughout.

所以通过上述内容可以看出搅拌车一旦出现抱轴会带来怎样的危害和影响，从而要想避免该设备出现抱轴问题，就一定要做好相关的防范措施。也因此在对该设备进行防范措施的时候，一定要注意方法步骤是否正确。

Therefore, through the above content, we can see what kind of harm and influence the mixer will bring once it has axle holding. In order to avoid the problem of axle holding, we must take relevant preventive measures. Therefore, when taking preventive measures for the equipment, we must pay attention to whether the methods and steps are correct.