自动上料搅拌车的减震器如有故障或问题，要检查减震器是否有漏油现象，然后用力按下保险杠、松开，如混合车有二或三跳，说明减震器好，据了解下：
If there is a fault or problem with the shock absorber of the automatic feeding mixer, first check whether there is oil leakage in the shock absorber, then press the bumper firmly and loosen it. If the mixer has two or three jumps, it means that the shock absorber is good
1、混凝土搅拌车在路面行驶10，条件较差时停车。用手触摸减震器外壳。此时，可以加入适当的润滑油，然后测试，如果外壳是热的，那是减震器内部缺油，应加入足够的油;否则，减震器就会失灵。
1. The concrete mixer runs 10 km on the road and stops when the condition is poor. Touch the shock absorber housing with your hand. At this time, you can add appropriate lubricating oil, and then test, if the shell is hot, that is the shock absorber internal lack of oil, should add enough oil; Otherwise, the shock absorber will fail.
2、删除直立的减震器,并连接底部环虎钳上夹,减少振动杆拉几次,这一次应该是稳定的抵抗,拉起阻力时应大于阻力压下来,或不稳定的电阻等可能是内部缺乏油挡板或阀门零件损坏,应修理或更换零件。
2. Remove the vertical shock absorber, connect the upper clamp of the bottom ring vise, and reduce the pulling of the vibrating rod for several times. This time, the resistance should be stable. When pulling up, the resistance should be greater than the resistance. When pressing down, or unstable resistance, it may be that there is no oil baffle inside or the valve parts are damaged. Repair or replace the parts.
3、用力按压保险杠，然后松开，如果汽车有2~3次跳跃，减震器工作正常。
3. Press the bumper hard and release it. If the car jumps 2-3 times, the shock absorber works normally.
4、当混凝土搅拌车运行缓慢，急刹车时，如果车辆振动比较严重，减震器就会出现问题。
4. When the concrete mixer runs slowly and brakes suddenly, if the vehicle vibrates seriously, the shock absorber will have problems.
Thank you for reading, hope the above content can help you, if you want to know more wonderful content, please click our official website: Zhongke self loading mixer https://www.cnzkjf.com .
