知道! ! ! !混凝土搅拌车轮胎偏磨的真正原因是什么?注意!混凝土搅拌车主要用于工程建筑，其运行环境普遍较差。在如此恶劣的环境下，对水泥混凝土搅拌机的影响是非常大的。
Know!!!!! What's the real reason for the eccentric wear of the concrete mixer? Note! The concrete mixer is mainly used in engineering construction, and its operation environment is generally poor. In such a bad environment, the impact on the cement concrete mixer is very large.
例如，水泥混凝土搅拌车的轮胎，路面不平会加速轮胎的磨损，一些水泥混凝土搅拌车的司机说，轮胎更严重，尤其是前轮。到底发生了什么?
For example, the uneven road surface of the tires of cement concrete mixer will accelerate the wear of the tires. Some drivers of cement concrete mixer say that the tires are more serious, especially the front wheels. What happened?
许多人认为混凝土水泥搅拌车轮胎的偏磨是由车轮外倾角超级糟糕,但实际上偏心磨损的轮胎在很大程度上是由前束值超差引起的,根据多年的四轮定位技术人员工作总结经验和分析大量的本地化测试数据:右脚趾值能有效防止轮胎偏磨的。
Many people think that the eccentric wear of the concrete cement mixer tire is caused by the extremely bad camber angle, but in fact, the eccentric wear of the tire is largely caused by the excessive toe value. According to the work of four-wheel positioning technicians for many years, we summarize experience and analyze a large number of local test data: the right toe value can effectively prevent the tire from eccentric wear.
还有一种轮胎的偏转是由偏差引起的总数的角落的方向盘,车轮外倾角和主销倾角不正确,实际驾驶的混凝土水泥搅拌机,大部分的直线,转弯,扭转,总角落的时间并不多,所以产生的挠度是更少。
There is also a kind of tire deflection caused by the deviation of the largest total number of corners of the steering wheel, the camber and kingpin angle are not correct, the actual driving of the concrete cement mixer, most of the straight line, turning, torsion, the time of the largest total corner is not much, so the deflection is less.
水泥混凝土搅拌车轮胎与地面接触时变形引起的灵活和随机特性很大程度上抵消车轮外倾角可能轮胎偏磨,甚高压轮胎超差车轮外倾角对轮胎磨损的影响不大,有很多货车空时为了减少轮胎与地面的摩擦,减少滚动阻力和特别设计的变量车轮外倾角。
The flexible and random characteristics caused by the deformation of the cement concrete mixer tire when it contacts the ground largely counteract the possibility of eccentric wear of the tire due to the camber angle, and even the influence of the high-pressure tire's out of tolerance camber angle on the tire wear is not significant. There are many freight cars to reduce the friction between the tire and the ground, reduce the rolling resistance and the specially designed variable camber angle.
从设计上的考虑,为了限制混凝土水泥搅拌机在直线驱动轮外倾角引起的轮胎偏磨,混凝土水泥搅拌机设置一定的前束值,因为混凝土搅拌车驾驶不同的路况和湍流等因素,碰撞,发动机磨损,即使是坚实的混凝土水泥搅拌车,由于上述原因，其定位角不同程度地逐渐改变原有的脚趾值。有些值有变化，在驾驶过程中可以感觉到，如主销角度、车轮外倾角、后轮梁值变化比较严重。
Considering from the design, in order to limit the tire eccentric wear caused by the camber angle of the straight-line driving wheel of the concrete mixer, the concrete mixer is set with a certain toe in value, because the concrete mixer drives different road conditions and turbulence and other factors, such as collision, engine wear, even the most solid concrete mixer, Due to the above reasons, the positioning angle gradually changes the original toe value. Some values have changes, which can be felt during driving, such as kingpin angle, camber angle, rear wheel beam value changes seriously.
水泥混凝土搅拌车的轮胎是非常重要的，通常要多注意轮胎的磨损问题，做好水泥混凝土搅拌车轮胎的保养工作。
The tire of cement concrete mixer is very important. Generally, we should pay more attention to the wear of tire and do a good job of tire maintenance.
The above is a detailed introduction to the main factors of tire wear of Zhongke mixer. To learn more, please click https://www.cnzkjf.com
