The engine of the concrete mixer has overheated to a dangerous degree. Bad luck may cause it to break down. When driving on the highway, when the water temperature indicator enters the red area and keeps high or the red area vibrates for many times, emergency measures shall be taken.

　　如果在普通的高速公路上发动机过热，尽可能快地减速，把搅拌器移到阴凉的地方，或者更冷的地方，然后停下来。打开引擎盖，让发动机空转，等待发动机温度逐渐恢复正常。当发动机温度恢复正常时，关闭发动机。然后等到发动机温度充分下降后，再检查发动机冷却水的量。此时，发动机的冷却水严重不足。冷却水不足后，按规定再次检查冷却系统，确认无其他故障，即可启动发动机继续行驶。

　　If the engine overheats on an ordinary highway, slow down as quickly as possible, move the mixer to a cool place, or colder place, and then stop. Open the engine hood, let the engine idle and wait for the engine temperature to gradually return to normal. When the engine temperature returns to normal, shut down the engine. Then wait until the engine temperature drops sufficiently before checking the amount of engine cooling water. At this time, the engine cooling water is seriously insufficient. After the cooling water is insufficient, check the cooling system again as required, and confirm that there are no other faults, then start the engine to continue driving.

　　如果高速公路上引擎过热，你需要打开所有温暖的空气，打开窗户，这将是车里的地狱。在热风冷却水冷却的帮助下，冷却水可以大大减少。这使你可以继续开车到近的高速公路出口，并开车到一个的地方停下来。接下来，用同样的方法冷却引擎。小心不要把车停在路边，以免影响交通或被撞。把混凝土搅拌机放在的地方。

　　If the engine on the highway overheats, you need to open all the warm air, open the windows, it will be hell in the car. With the help of hot air cooling water, cooling water can be greatly reduced. This allows you to continue to drive to the nearest motorway exit and to a safe place to stop. Next, cool the engine in the same way. Be careful not to park your car on the side of the road so as not to affect the traffic or be hit. Put the concrete mixer in a safe place.