Concrete mixer for a long time do not need to do?

　　混凝土搅拌机、运行与生产是行业内所有用户的愿望，如何让混凝土搅拌机始终保持使用状态，是众多设备使用者工作中的。

　　Efficient and safe operation and production of concrete mixer is the wish of all users in the industry. How to keep the concrete mixer in use is the focus of many equipment users.

　　有些设备用户认为混凝土搅拌机较长时间不用只要停机就行了，其实这种操作是错误的。为及时混凝土搅拌机隐患，确保混凝土搅拌机状态完好，避免给设备使用带来负面作用，混凝土搅拌机较长时间不用，在设备停工后要进行良好的设备维护保养后，才不会给设备造成损坏。
            

　　Some equipment users think that the concrete mixer does not need to be shut down for a long time. In fact, this operation is wrong. In order to eliminate the hidden danger of concrete mixer in time, ensure that the concrete mixer is in good condition, and avoid negative effects on the use of equipment, the concrete mixer will not be used for a long time, and will not damage the equipment after the equipment is shut down for good maintenance.

　　，混凝土搅拌机工作完成后,清扫搅拌机及相关配套设备各部位浆液、积灰。及时清洗搅拌机内及整机表面的灰尘、沾附的砼和油污，防止砼干结，保持清洁。将散装水泥罐闸门关好，将螺旋管内水泥全部输送出来，不要残留任何水泥在管内。同时彻底清洗机械现场。

　　First of all, after the concrete mixer is completed, clean the slurry and ash at all parts of the mixer and related supporting equipment. Timely clean the dust, attached concrete and oil stain in the mixer and on the surface of the whole machine to prevent the concrete from drying and keep it clean. Close the gate of bulk cement tank, transport all the cement in the spiral pipe, and do not leave any cement in the pipe. At the same time, thoroughly clean the mechanical site.

　　其次，对混凝土搅拌机械进行维护保养，对各润滑点加注润滑油，对需保护部分涂油防锈。

　　Secondly, maintain the concrete mixing machine, add lubricating oil to each lubricating point, and apply oil to the part to be protected for rust prevention.

　　然后，混凝土搅拌机停机后将所有操作开关置于断路位置，并关闭各电源开关。

　　Then, after the concrete mixer stops, put all operation switches in the open circuit position and turn off all power switches.