谈到搅拌车的清洗与保养，就不得不提及发动机的保养了，发动机的外部清洁并没有大家想的那么容易，那么接下来
中科搅拌车来详细说一说发动机的清洁步骤。
When it comes to the cleaning and maintenance of the mixer, we have to mention the maintenance of the engine. The external cleaning of the engine is not as easy as we think. Then, the mixer of China and Kuwait will talk about the cleaning steps of the engine in detail.
步骤一：用塑料薄膜将搅拌车分电器遮盖起来，用半湿毛巾压住薄膜，此举可以防止高压水冲进分电器，导致搅拌车故障。
Step 1: first, cover the distributor of the mixer with plastic film, and press the film with semi wet towel, which can prevent high-pressure water from rushing into the distributor, leading to the failure of the mixer.
步骤二：使用高压水枪由搅拌车发动机侧面按从上到下的顺序将引擎室内侧及搅拌车发动机外表的附着类污物冲净。
Step 2: use a high-pressure water gun to clean the attached dirt on the inside of the engine and on the outside of the mixer engine from top to bottom.
步骤三：将发动机外部清洁剂均匀喷洒在浸湿后的发动机及引擎室四周，等待三到五分钟，用毛刷仔细清洗引擎室。
Step 3: spray the engine external cleaner evenly around the soaked engine and engine room, wait for three to five minutes, and clean the engine room carefully with a brush.
步骤四：直接用高压水枪快速冲洗污渍。
Step 4: use high-pressure water gun to wash the stains quickly.
步骤五：重复步骤三和步骤四，直发动机表面清洗干净
Step 5: repeat step 3 and step 4 until the engine surface is clean
步骤六：搅拌车发动机冲洗干净后，用半湿毛巾擦干，擦不到的地方用风干机吸干，等待风干。
Step 6: after the mixer engine is washed clean, dry it with a semi wet towel, and use an air dryer to dry the places that cannot be wiped, and finally wait for the air to dry.
步骤七：用塑料橡胶保护剂给引擎室内的塑料橡胶部件上光，然后给金属部件镀膜。
Step 7: polish the plastic rubber parts in the engine room with plastic rubber protector, and then coat the metal parts.
步骤八：所有步骤完成后，用干净的无纺抛光巾检验搅拌车发动机和引擎a室内侧。
Step 8: after all steps are completed, use clean non-woven polishing towel to inspect the mixer engine and the inner side of engine chamber a.
The above is about the engine cleaning and maintenance of Zhongke mixer. If you want to know more, please consult https://www.cnzkjf.com Website.
