自上料搅拌机多功能，使整个施工更加简便。在中科搅拌机施工中也难免出现问题，例如上料出料不顺畅，有堵料现象，这些情况如何处理呢？下面看看中科搅拌机厂家怎么说？
The self feeding mixer is multifunctional, which makes the whole construction more convenient. In the construction of Zhongke mixer, it is inevitable that there will be problems, such as unsmooth feeding and discharging, and material blocking. How to deal with these problems? Now let's take a look at what the blender manufacturers of China Science and technology say?
中科搅拌机上料中的堵管原因：有时候我们会使用手动料枪吸料，为了方便操作直接将料枪插入物料桶，料枪吸料口被严实的物料压缩，强大的负压将满满的物料拉走，这对上料机伤害非常大，且易堵塞管道。
Cause of pipe blockage in feeding of Zhongke mixer: sometimes we use manual material gun to suck material. In order to facilitate operation, the material gun is directly inserted into the material barrel. The suction port of the material gun is compressed by the solid material, and the strong negative pressure pulls the full material away, which is very harmful to the feeding machine and easy to block the pipe.
所以防止中科搅拌机堵管重要的是掌握正确的上料机器。正确的方式是物料在吸料口和空气形成一定的气物混合比，在气流的推动下均匀流入上料机。这个时候我们需要将料枪设计带有补气功能。如果物料积压时间过长可能很硬，这个时候需要在料枪上装一个振荡器，敲碎结块的物料。
Therefore, it is important to master the correct feeding machine to prevent pipe blockage of Zhongke mixer. The correct way is to form a certain air-material mixture ratio between the material at the suction port and the air, and flow into the feeder evenly under the push of the air flow. At this time, we need to design the material gun with air supply function. If the material overstocking time is too long, it may be very hard. At this time, an oscillator needs to be installed on the material gun to break the caked material.
Thank you for reading, hope the above content is helpful to you, if you want to know more wonderful content or blender price, please click to consult our official website: Zhongke blender price https://www.cnzkjf.com .
