恰当的保养可以为自动上料搅拌车带来更长的寿命，但是具体保养方式是怎样的呢？下面我们一起来了解一下。
Proper maintenance can bring a longer service life for the automatic loading mixer, but what is the specific maintenance method? Let's take a look.
机油不能只靠加，要换机油具有润滑冷冻情节等系列功能，在自动上料搅拌车初次使用500小时候需要换油，初次换油后，每1500小时换一次油，值得注意的是，在换油时需要完全清洗油道，避免机械杂质留在油底壳及油路中。
The engine oil can not only be added, but also has a series of functions such as lubrication and refrigeration. The oil needs to be changed when the automatic feeding mixer is first used for 500 hours. After the initial oil change, the oil needs to be changed every 1500 hours. It is worth noting that the oil passage needs to be completely cleaned during the oil change to avoid mechanical impurities remaining in the oil pan and oil circuit.
不能混合使用不同企业的液压油，自动上料搅拌车使用时长达3个月时，同样需要更换，不同企业的液压油不能混合使用，更换液压油时，油管油管接头散热器液压泵液马达需要清洗干净，避免造成马达液压泵使用故障，延长寿命。初次换油过后，每年进行一次液压油的更换即可。
The hydraulic oil of different brands cannot be mixed. When the automatic feeding mixer is used for up to 3 months, it also needs to be replaced. The hydraulic oil of different brands cannot be mixed. When replacing the hydraulic oil, the hydraulic pump motor of the oil pipe joint radiator needs to be cleaned to avoid the use failure of the motor hydraulic pump and prolong the service life. After the initial oil change, replace the hydraulic oil once a year.
恰当保养散热器，自动上料搅拌车使用时长达3个月后，需要更换与原装滤芯精度一致的滤芯，初次更换过后，每隔半年进行一次更换即可。此外，驾驶员应当每天对散热器的风扇进行检查，看其是否正常运转。
Properly maintain the radiator. After the automatic feeding mixer is used for up to 3 months, the filter element with the same accuracy as the original filter element needs to be replaced. After the initial replacement, it can be replaced every six months. In addition, the driver should check the fan of the radiator every day to see whether it works normally.
逐一柱塞的行程余量，维修调试喷油泵事，需要对行程余量进行检查，以此判断喷油泵是否需要进行调整，将柱塞与套筒的磨损降低，驾驶员得要根据喷油泵的不同结构采用不同方法进行检查。
Check the stroke allowance of the plunger one by one. When repairing and debugging the fuel injection pump, it is necessary to check the stroke allowance first, so as to judge whether the fuel injection pump needs to be adjusted to reduce the wear of the plunger and sleeve. The driver has to use different methods to check according to different structures of the fuel injection pump.
恰当保养拖轮，自动上料搅拌车在每天运转前，驾驶员需要对拖轮进行注油，另外每隔3个月的时间就需要对拖轮进行润滑脂的补加。
The tugboat shall be properly maintained. Before the operation of the automatic feeding mixer truck every day, the driver needs to fill the tugboat with oil. In addition, the tugboat needs to be supplemented with grease every three months.
The above is the specific maintenance steps of Zhongke Jufeng mixer. More details will continue to be popularized later.https://www.cnzkjf.com
