熔化百剑而成，柄芒不分，攻守不定。形又细又长，可藏于竹竿中，一旦出鞘寒光闪现，颤动如飞瀑流水，因而得名---天瀑剑！自动上料搅拌车犹如一把天瀑剑，集上料、搅拌于一体，可智能配料上料，还能自动装载搅拌，是真正的一体机，小巧、灵活、省时、省力、省场地！对于它的磨损检查也有一定的严格要求，具体是什么呢？不妨我们一起去看看吧！
It's made by melting all kinds of swords. It can't be divided into two parts, attacking and defending indefinitely. It is thin and long, and can be hidden in the bamboo pole. Once it comes out of the scabbard, the cold light flashes and vibrates like a waterfall. Therefore, it is named Tianpu sword! The automatic feeding mixer is like a sword of heaven waterfall. It integrates feeding and mixing into one. It can intelligently burden and load materials, and can automatically load and mix. It is a real all-in-one machine, compact, flexible, time-saving, labor-saving and site saving! There are also some strict requirements for its wear inspection. What are the specific requirements? Let's go and have a look!
，针对自动上料搅拌车的具体磨损情况，我们应观察机油颜色、品质方面是否出现问题，观察外表是否存在铁屑，检查机油粘性。若机油中存在很多铁屑，则说明曲轴瓦、连杆瓦位置出现严重磨损情况。若机油呈现粘稠状态，说明机油已经有很长时间却未经过更换。
First of all, for the specific wear of the automatic feeding mixer, we should observe whether there are problems in the color and quality of the oil, observe whether there are iron chips on the surface, and check the oil viscosity. If there are a lot of iron chips in the engine oil, it means that the crankshaft bearing bush and connecting rod bush are seriously worn. If the oil is viscous, it means that the oil has not been replaced for a long time.
在拆开连杆活塞的曲轴时，观察连杆瓦、曲轴瓦具体状况，整机均不可使用。若磨损情况不严重，可让其经过磨轴加工后，自动上料搅拌车方可使用。
When the crankshaft of connecting rod piston is disassembled, observe the specific conditions of connecting rod bush and crankshaft bush. The whole machine can not be used. If the wear is not serious, it can be used after grinding shaft processing, and the automatic feeding mixer can be used.
观察气缸套的具体磨损情况，在拆开缸套时，禁止打到发动机机体，避免出现严重损坏情况。
Observe the specific wear of the cylinder liner. When the cylinder liner is disassembled, do not hit the engine block to avoid serious damage.
对于自动上料搅拌车来说，在整个维修期间，每个动作都应谨慎小心，任何一个细节的错误都会致使发动机不能达到正常工作状态，因此在对自动上料搅拌车维修时，应请专门的技术人员进行，避免出现更大失误。
For the automatic feeding mixer, during the whole maintenance period, every action should be cautious and careful, any detail error will cause the engine can not reach the normal working state, so in the maintenance of the automatic feeding mixer, special technicians should be invited to avoid more mistakes.
